A Bretz water damage inspection isn't a walk-through with a flashlight. It's a systematic, instrument-driven assessment that produces a written report showing exactly where the water went, how saturated each affected assembly is, and what needs to happen next.
A credible water damage inspection in Bretz does more than identify where the water is visible. It traces where the water went — through structural assemblies, behind finishes, and into below-grade spaces — and produces a written, defensible assessment you can act on or present to an insurance carrier, a buyer, or a remediation contractor.
Thermal imaging is non-destructive and covers large surface areas quickly — making it the most efficient way to map water migration in a Bretz property.
Qualitative assessment says "it looks wet." Quantified readings say "this framing is at 28% moisture content and the dry standard is 10%."
A verbal assessment is an opinion. A written report with instrument readings is documentation.
Our Bretz inspection service covers two distinct use cases that require slightly different approaches: pre-remediation inspection (mapping an active or recent water event for claim documentation and remediation scoping) and pre-purchase or post-remediation verification inspection (confirming whether previous water damage was properly remediated or whether current conditions indicate an ongoing or previous water problem). Both use the same instrument suite and produce the same written report format, but the findings are interpreted differently for each use case.
COS Water Damage Restoration's Bretz inspection team covers every structural assembly type, every common water migration path, and every inspection use case encountered in residential and commercial water damage situations in WV.
When a water damage event has just occurred in a Bretz property — or happened within the last several days — our inspection maps the full extent of saturation while the moisture is still detectable by thermal imaging and direct meter readings. This inspection is the foundation of the remediation scope and the insurance claim documentation. Without it, remediation crews are guessing at what to dry, and insurance carriers are estimating on incomplete data. Our Bretz active event inspection captures the full saturation picture at the moment of peak detectable moisture — when the readings tell the most accurate story of what happened.
Pre-purchase water damage inspections in Bretz are scheduled on the buyer's timeline and the written report is available for the transaction file.
After a water damage remediation project is completed in a Bretz property — whether by COS Water Damage Restoration or another company — a verification inspection confirms that structural drying was completed to standard moisture content levels and that no hidden moisture was left behind. This inspection is requested by property owners who want independent confirmation of completion, by landlords who need documentation before returning a property to tenancy, and by sellers who need to demonstrate to a buyer that prior water damage was fully resolved. Our Bretz post-remediation inspection produces a written verification report formatted for real estate and insurance use.
Properties in Bretz that had a water event 48 hours or more before inspection — or where a slow leak went undetected for an extended period — may present mold risk alongside ongoing moisture concerns. Our mold risk assessment inspection identifies the structural conditions that support mold growth: elevated moisture content in organic materials, elevated ambient relative humidity, and the presence of visible mold growth on surface or semi-concealed areas. This assessment determines whether a standard drying-focused remediation is appropriate or whether S520-standard mold remediation protocols need to be incorporated into the project scope.
Below-grade moisture in Bretz properties is underdetected and underlies a significant portion of structural issues discovered later.
When an insurance carrier requests additional documentation for a water damage claim — or when a claim has been disputed based on damage scope — our Bretz insurance documentation inspection provides the instrument-backed evidence that supports the remediation scope. Thermal images with annotations, moisture meter readings at labeled sensor points, water category determination, and written assessment of the connection between the reported event and the documented damage create a claim file that can withstand adjuster scrutiny.


Call +1-844-499-0972 and describe your situation — active event, pre-purchase, post-remediation, mold concern, or insurance documentation. Our Bretz scheduler assigns the appropriate inspection type and confirms your appointment. Most Bretz residential inspections are available within 24-48 hours.
Our Bretz inspector arrives with FLIR thermal camera, calibrated pin-type and non-penetrating moisture meters, and inspection documentation tools. The inspection begins with a thermal pass of all suspected affected areas, followed by direct meter readings at all thermally identified locations. Each reading is recorded at a labeled sensor point location on the floor plan.
You understand what was found before you receive the written report.
Report delivered in the format your use case requires, within 48 hours of inspection.



"The thermal imaging session was what sold me on how a proper Bretz water damage inspection should work. Our inspector traced water migration I never could have guessed at — the event in the utility room had spread moisture into the adjacent storage room wall framing more than twelve feet away. The written report documented all of it and our remediation contractor used it directly to scope the drying project."
"We used the COS Water Damage Restoration Bretz inspection report to file a homeowner's claim for a water damage event. The adjuster reviewed the thermal image documentation and sensor point readings and approved the full remediation scope on first submission. The inspection report paid for itself many times over by eliminating the supplement process."
"We manage a portfolio of Bretz rental properties and COS Water Damage Restoration's inspection service is what we use every time a water event is reported, prior to any remediation starting. The inspection report maps the damage completely — it's what we give our remediation contractor as the scope of work and what we give our insurer as the damage documentation. Having a consistent, instrument-backed inspection process has eliminated the disputes we used to have about whether remediation was complete or whether the damage scope matched what we claimed."
COS Water Damage Restoration's certified inspection team serves Bretz and surrounding communities throughout WV. Call +1-844-499-0972 to schedule your Bretz inspection.
Whether you need inspection for an active event, a purchase, or post-remediation verification — our Bretz team produces a written, instrument-backed report. Call +1-844-499-0972 to schedule.
📞 Call +1-844-499-0972 — Schedule Bretz InspectionIICRC Certified · FLIR Thermal Imaging · Written Reports · Bretz, WV